Setup the Coffee Table
Posted by Sobro Team on
Once your Sobro Coffee Table arrives please read all instructions and precautions in the manual before using this product. All parts necessary for setup will be located within the storage drawer.
1. Installing the Legs
Please read: Do not attempt to attach the legs or fully install the Sobro table on your own. You will need two people or more to completely install the Sobro.
Step One
When attaching the four legs to your Sobro, use the foam shipping inserts or a blanket to serve as a cushion for the table to rest on.
Have one partner lift one side of the Sobro table off the ground*. Rest the opposing side on a foam insert or cushion for protection.
Step Two
While the corner of the Sobro table is lifted, the other partner should attach the leg by screwing it into the leg nut. Screw in the leg until it is fully inserted into the Sobro table and is secure. Do not overtighten.
Step Three
Repeat the process with the other three legs of the Sobro. Remember to always protect the corners without legs by using either one of the foam inserts or a blanket to avoid damaging the table.
Step Four
After installing the legs or moving the Sobro, you must let the refrigerator coolant settle for a minimum of 4 hours before plugging in the Sobro.
We repeat: Do not plug in the Sobro Coffee Table until 4 hours have passed.
.
⚠️ *Use proper lifting technique ⚠️
Exercise caution! If you have a history of back pain or injury, do not attempt to lift table. Sobro (Storebound, LLC) will not accept responsibility for any injury that may occur during set up process.
2. Installing the Wheels
Sobro a gogo: The two wheels included are intended to be installed to allow you to easily move the Sobro table to your desired location. WARNING: These are not for wheeling the table up and down any type of stairs or steps.
Step One
The Sobro Coffee Table comes with two wheel attachments for transportation. The two wheels attach to one side of the underside of the Sobro by sliding into the wheel braces.
Step Two
Have one partner lift one side* of the Sobro table off the ground while the other partner slides each wheel into its corresponding wheel brace.
Step Three
To move the Sobro, after the wheels are installed, lift one end of the Sobro and use the wheels to roll it to the desired location. To remove the wheels, reverse the procedure in Step One.
Step Four
After installing the wheels and moving the Sobro, you must let the refrigerator coolant settle for a minimum of 4 hours before plugging in the Sobro.
We repeat: Do not plug in the Sobro Coffee Table until 4 hours have passed
.
.
3. Installing the Power Cord
Step One
Warning: Do not attempt to install the power cord until the legs are installed.
Have one partner lift the right side* of the Sobro table off the ground. Rest the opposing side on a foam insert or cushion for protection.
.
Step Two
The power socket is located on the underside of the Sobro Coffee Table towards the back right corner. Locate the socket and unwrap the power cord before attaching.
Step Three
Plug in the adaptor end of the cord to the socket in the indicated location above.
Step Four
After installing the legs or moving the Sobro, you must let the refrigerator coolant settle for a minimum of 4 hours before plugging in the Sobro.
We repeat: Do not plug in the Sobro Coffee Table until 4 hours have passed..
.
Grounding Instructions: This appliance must be plugged into a grounded socket. The power cord that is supplied with the appliance contains the appropriate grounding conductor and grounding plug.
The plug must be inserted into a wall outlet that has been grounded in accordance with the existing local codes and ordinances. The required nominal voltage and frequency are indicated on the rating label. Consult a qualified electrician for other concerns.
⚠️ *Use proper lifting technique ⚠️
Exercise caution! If you have a history of back pain or injury, do not attempt to lift table. Sobro (Storebound, LLC) will not accept responsibility for any injury that may occur during set up process.